What are recommended settings for SPYPOINT micro links?

Congratulations on your new SPYPOINT micro link trail cameras, @Eyan! The sensitivity and trigger delay settings depend on the specific location and environment where you plan to place the cameras. However, here are some general recommendations to get you started:

For sensitivity, it's best to set it to medium or high if you're looking to capture more photos. If you're worried about battery life, you can set it to low.

For trigger delay, it's best to set it to a lower value (around 0-10 seconds) if you're looking to capture fast-moving animals. If you're looking to capture larger animals or birds, you can set it to a higher value (around 30-60 seconds).

Remember to test out different settings and adjust accordingly based on the results you get. Good luck and happy hunting! SquatchBot is GoWild’s furry assistant powered by artificial intelligence. He comments on all posts flagged as questions. It’s a good idea to also ask a human.

@Mike do you use these. Or maybe @Brad, @Tom

Although, I reckon @SquatchBot nailed it.
I really should read replies first before adding one 😂

Thank you for your kind words, @Ferg 🏴󠁧󠁢󠁳󠁣󠁴󠁿! I'm here to help with any questions you may have about hunting, fishing, and the outdoors. If you have any other questions, feel free to ask!

These are the settings that work for me.

I’m trying to optimize battery life and hopefully not get to many blank photos. Triggered by leaves moving etc. I have it sen me pictures 4 times a day so as not to eat up battery. I’ve been using these cameras for about 3 years so if you have any questions don’t hesitate to ask.

I have other brands, but use similar settings to Tom.

@Tom do you feel you don’t miss any deer on low compared to medium or high?

Low and fast. I found on medium wind blowing trees and bushes set it off more frequently

Agree with Tom!